Experienced Hardwood Flooring Refinishing throughout Austell

GA Flooring offers hardwood floor refinishing services in Austell, Georgia. Professional hardwood flooring refinishing services can restore your hardwood to its original beauty. Our team offers a dustless refinishing service that will guarantee to return the natural beauty to your hardwood floors.

The GA Flooring, Inc team has years of experience refinishing hardwood flooring in AustellGeorgia. Our team prides themselves on providing premium hardwood flooring refinishing services guaranteeing that your floors will look like new.

Oil Refinishing Vs. Water Refinishing

The two main types of hardwood flooring refinishing compounds are oil based and water based. There are several differences between oil and water based refinishing coatings: drying time, odor, price, and color - not durability. Many on-site finished hardwoods use an oil based compound for hardwood finishing. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Be aware that if you change to water based, it will look different. Below you will find several FAQ's about the different types of hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Ambers (yellow, brownish-orange tones) over time.
• Odor can last for several days or even weeks.
• Oil allows for richer darker tones by soaking deep into the wood
• Oiled wood tends to have a muted shine
• Darker color tones.
• Minimum drying time is 8 hours and can last up to 24 hours or more based on humidity and other environmental factors.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Any given coat will dry enough in a few hours so that the owners can walk on it.
• Cost is more expensive (additional charge to use).
• Curing-70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Do not replace area rugs until floor is fully cured. The floor may be walked on and furniture replaced after 24 hours, but remains susceptible to scuffing and marring until completely cured. Slight fumes/odors. The day after the final coat most people smell nothing. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.