Premium Hardwood Flooring Refinishing Experts Belvedere

GA Flooring provides professional hardwood floor refinishing in Belvedere, Georgia. If your hardwood floor has lost its beauty through age, damage, or even just wear and tear, it can be brought back to its original beauty. We offer a dustless refinishing service that will guarantee to return the natural beauty to your hardwood floors.

For years our team at GA Flooring, Inc has been refinishing hardwood flooring, and returning floors to their original beauty. Our team prides themselves on providing professional hardwood flooring refinishing services ensuring that your floors will look as good as new.

Oil Vs. Water Refinishing

The two main types of hardwood flooring refinishing compounds are oil based and water based. There are several differences between oil and water based refinishing coatings: drying time, odor, price, and color - not durability. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. Switching to a water based compound from an oil based one will dramatically change the look of your refinished hardwood. Listed below is are several FAQ's about oil and water based hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• The color begins to grow yellow or brownish-orange over time
• Odor (can linger for several days or even weeks).
• Oil allows for richer darker tones by soaking deep into the wood
• Oiled wood tends to have a muted shine
• Darker color tones.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• Faster drying times allows for more coats to be applied daily.
• Coatings will dry enough to walk on in a few hours
• Cost is more expensive (additional charge to use).
• Curing-70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Do not replace area rugs until floor is fully cured. The floor may be walked on and furniture replaced after 24 hours, but remains susceptible to scuffing and marring until completely cured. Slight fumes/odors. The day after the final coat most people smell nothing. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.