Premium Hardwood Flooring Refinishing Professionals throughout Briarcliff

GA Flooring offers hardwood floor refinishing in Briarcliff, Georgia. Professional hardwood flooring refinishing services can restore your hardwood to its original beauty. Our team offers a dustless refinishing service that will guarantee to restore the natural beauty to your hardwood floors.

The GA Flooring, Inc team has years of experience refinishing hardwood flooring in BriarcliffGeorgia. Our team prides themselves on providing experienced hardwood flooring refinishing services ensuring that your floors will look like new.

What Type Of Refinishing Do I need?

There are two versions of refinishing products for hardwood floors oil based and water based compounds. Some of the differences between oil and water based finishing products are odor, drying time, price, and color. Many on-site finished hardwoods use an oil based compound for hardwood finishing. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. If you choose to switch from an oil based compound to a water based hardwood refinishing compound you must be aware that it will look different than it had previously. Below you will find several FAQ's about the different types of hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• The color begins to grow yellow or brownish-orange over time
• Odor (can linger for several days or even weeks).
• Oil interacts with the wood for warmer tones. Gives the wood more depth and color. This is because it is absorbed into the wood and the oil accentuates the wood grain, giving the grain more.
• Oiled wood tends to have a muted shine
• Darker color tones.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• Faster drying times allows for more coats to be applied daily.
• Coatings will dry enough to walk on in a few hours
• Cost is more expensive (additional charge to use).
• Curing-70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Do not replace area rugs until floor is fully cured. The floor may be walked on and furniture replaced after 24 hours, but remains susceptible to scuffing and marring until completely cured. Slight fumes/odors. The day after the final coat most people smell nothing. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.