Premium Hardwood Flooring Refinishing in Dunaire

GA Flooring provides hardwood floor refinishing services in Dunaire, GA. If your hardwood floor has lost its beauty through age, damage, or even just wear and tear, it can be brought back to its original beauty. We offer a dustless refinishing service that will guarantee to restore the original beauty to your hardwood floors.

GA Flooring, Inc has years of experience refinishing hardwood flooring and restoring the natural look of floors. Our team prides themselves on providing premium hardwood flooring refinishing services guaranteeing that your floors will look as good as new.

Oil Vs. Water Refinishing

There are two versions of refinishing products for hardwood floors oil based and water based compounds. Some of the differences between oil and water based finishing products are odor, drying time, price, and color. Many on-site finished hardwoods use an oil based compound for hardwood finishing. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. If you choose to switch from an oil based compound to a water based hardwood refinishing compound you must be aware that it will look different than it had previously. Below you will find several FAQ's about the different types of hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• The color begins to grow yellow or brownish-orange over time
• Longer lasting odor.
• Deep saturation of the oil allows for darker and richer tones
• Oiled wood tends to have a muted shine
• Oil saturates the wood and works the best with only darker stains.
• Minimum drying time is 8 hours and can last up to 24 hours or more based on humidity and other environmental factors.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Coatings will dry enough to walk on in a few hours
• Cost is more expensive (additional charge to use).
• 70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.