Experienced Hardwood Flooring Refinishing throughout Lithia Springs

GA Flooring provides expert hardwood floor refinishing in Lithia Springs, Georgia. If your hardwood floor has lost its beauty through age, damage, or even just wear and tear, it can be brought back to its original beauty. Our team offers a dustless refinishing service that can guarantee to return the natural beauty to your hardwood floors.

For years our team at GA Flooring, Inc has been refinishing hardwood flooring, and returning floors to their original beauty. Our team prides themselves on providing professional hardwood flooring refinishing services ensuring that your floors will look as good as new.

Oil Refinishing Vs. Water Refinishing

Which should I choose? The two main types of hardwood flooring refinishing compounds are water based and oil based. Some of the differences between oil and water based finishing products are odor, drying time, price, and color. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. If you choose to switch from an oil based compound to a water based hardwood refinishing compound you must be aware that it will look different than it had previously. Below you will find several FAQ's about the different types of hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• Over time the color can change, darkening or becoming more orange
• Longer lasting odor.
• Deep saturation of the oil allows for darker and richer tones
• The natural oils in the sealer allow for a dull shine
• Darker color tones.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• Faster drying time means less time spent waiting for the job to be finished.
• Coatings will dry enough to walk on in a few hours
• Cost is more expensive (additional charge to use).
• 70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.