Hardwood Flooring Refinishing Experts throughout Lithonia

GA Flooring provides professional hardwood floor refinishing services in Lithonia, GA. If your hardwood floor has lost its beauty through age, damage, or even just wear and tear, it can be brought back to its original beauty. Our team offers a dustless refinishing service that will guarantee to restore the natural beauty to your hardwood floors.

GA Flooring, Inc has years of experience refinishing hardwood flooring and restoring the natural look of floors. Our team strives to provide experienced hardwood flooring refinishing services ensuring that your floors will look like new.

What Type Of Refinishing Do I need?

The two main types of hardwood flooring refinishing compounds are oil based and water based. There are several differences between oil and water based refinishing coatings: drying time, odor, price, and color - not durability. Most on-site finished hardwood has and oil based finish. Prefinished wood can be water or oil based. If you have site finished wood in your home, it is probably oil based. If you choose to switch from an oil based compound to a water based hardwood refinishing compound you must be aware that it will look different than it had previously. Below you will find several FAQ's about the different types of hardwood refinishing compounds.

Oil Modified Polyurethane (OMU)

• Is a solvent based polyurethane, contains mineral spirit.
• Much higher in VOCs (Volatile Organic Compounds).
• The color begins to grow yellow or brownish-orange over time
• Odor (can linger for several days or even weeks).
• Deep saturation of the oil allows for darker and richer tones
• Presence. The natural oils in the sealer also give the wood a muted shine.
• Oil saturates the wood and works the best with only darker stains.
• Drying time per coat is at least 8 hours (high humidity, low temperature, lack of air movement cause this to vary—sometimes 24 hours plus is needed!) Need to wait overnight between coats.
• Curing— allow finish to cure for 24 hours from final coat before foot traffic and 30 days before placing area rugs. The floor may be walked on (light foot traffic only!) and after about 12 hours after second coat, but remains susceptible to scuffing and marring until completely cured. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!

Water Based/Water Borne Polyurethane

• You can conceivably do a coat every 2-4 hours. This takes 1-2 days off the job versus oil based poly which allows the homeowner to get back to their routine/life sooner.
• Fast drying time means foot traffic can resume only hours after the coat is applied.
• Cost is more expensive (additional charge to use).
• 70% cured after 1 day, 90% cured after 3 days, fully cured in approximately 7 days so area rugs can be placed down after 7 days. Use only a dry microfiber mop or cloth for cleaning during the first week or two—no liquid cleaners!
• VOC compliant.
• Best for natural and light to medium stains, not dark stains.
• Because it sets up so fast, there is little penetration into the wood.
• Feels/looks more “plastic”; tends to have greater reflection and shine.

Contact Us

If you have any questions about our services, please use our contact form to get in touch with us.